Home > Closet > Integrated Pullouts > Hamper Pullouts >

Closet Hamper Cabinet (30" wide hamper, 31.50" wide cabinet)

Closet Hamper Cabinet (30" wide hamper, 31.50" wide cabinet)

Alternative Views:

Retail Price $1,382.95
Sale Price + Options: $767.95
Savings: $615.00






Doors and Drawer Fronts

Grain Direction*:

Advanced Options

Interior Color*:

Disclaimer #2*:
Removable Back Danger Warning:The back of this cabinet is a 3/4" thick matching textured laminate and is inserted into the cabinet case after the cabinet is attached to the wall studs. This allows the back to fully cover the screw holes used to install the cabinet onto the wall. The result is a clean and seamless look for the cabinet interior as no construction holes will be visible after the back is inserted. That said, the back may fall forward if not secured after installation. Use your choice of screws, dabs of adhesive, double sided tape, trim molding, etc, to keep the back from falling forward and causing potential injury.

Disclaimer #3*:
Exposed/Open Cabinets:The interior cabinet case (sides, top, bottom) will be textured laminate over composite core. Nailers at rear of cabinet are plywood core for strength and durability. Cabinet sides, top, and bottom will need to be covered by a finished end panel, otherwise construction holes or exposed edges will be visible (i.e. you will need a finished end panel to cover any exposed sides).

Open cabinet with an integrated 30" wide hamper (cabinet to be 31.50" wide) (Polished Chrome, Pull-Out Hamper, with Removable Bags, Synergy Collection)
Quick Specifications
Custom Cabinets - Made In Oregon

Exposed Interior Cabinets (the interior of the cabinet is visible)


All cabinets are shipped ready to assemble (i.e. flat packed)
Full overlay (flush look) frameless construction (European style, confirmat screw assembly)
Full access (maximum storage capacity with no wasted space)
Cabinet backs are removable 3/4" thick textured laminate, allowing you to install the cabinets to the wall, then install the back thereby hiding the screws used for cabinet installation.

Doors are made in Oregon using Italian/Spanish textured laminate (composite core) and banded with extremely durable 1mm thick matching PVC banding
Cabinet interiors are Italian/Spanish textured laminate, horizontal grain, (*banding is vertical grain on the left and right sides)
Drawer Boxes are made in Oregon, dovetailed Baltic 5/8" birch plywood (fully assembled, notched, sanded, then clearcoat finished to ensure smooth joints)

Knobs and Pulls are not included with any of our cabinets
Hinges are made in North Carolina, Blum Inserta Blumotion (soft closing, self closing)
Drawer slides are made in North Carolina, Blum Tandem plus Blumotion (soft closing, heavy duty)
All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)

Construction holes will be visible on the sides of the cabinet once assembled.
Finished end panels (ordered separately) should be ordered to finish off the exposed cabinet sides after installation.

Share your knowledge of this product. Be the first to write a review »