Home > Closet > Hanging Rods and Wardrobe >

90 degree CORNER hanging rod wall cabinet (LEFT side return)

90 degree CORNER hanging rod wall cabinet (LEFT side return)


 
Alternative Views:


Retail Price $590.31
Sale Price + Options: $327.95
Savings: $262.36


Product Code: WCLSINGLEHANG90LM

Size

WIDTH*:


HEIGHT*:


DEPTH*:


LEFT side return*:


RIGHT side return*:

Advanced Options

Interior Grain Direction*:

Click to view another Interior Color

Interior Color*:


Disclaimer #2*:
Removable Back Danger Warning:The back of this cabinet is a 3/4" thick matching textured laminate and is inserted into the cabinet case after the cabinet is attached to the wall studs. This allows the back to fully cover the screw holes used to install the cabinet onto the wall. The result is a clean and seamless look for the cabinet interior as no construction holes will be visible after the back is inserted. That said, the back may fall forward if not secured after installation. Use your choice of screws, dabs of adhesive, double sided tape, trim molding, etc, to keep the back from falling forward and causing potential injury.

Disclaimer #3*:
Exposed/Open Cabinets:The interior cabinet case (sides, top, bottom) will be textured laminate over composite core. Nailers at rear of cabinet are plywood core for strength and durability. Cabinet sides, top, and bottom will need to be covered by a finished end panel, otherwise construction holes or exposed edges will be visible (i.e. you will need a finished end panel to cover any exposed sides).

Qty:
Description
 
This is a 90 degree corner closet cabinet with an adjustable hanging rod.
Quick Specifications
Custom Cabinets - Made In Oregon

Exposed Interior Cabinets (the interior of the cabinet is visible)


Construction

All cabinets are shipped ready to assemble (i.e. flat packed)
Full overlay (flush look) frameless construction (European style, confirmat screw assembly)
Full access (maximum storage capacity with no wasted space)
Cabinet backs are removable 3/4" thick textured laminate, allowing you to install the cabinets to the wall, then install the back thereby hiding the screws used for cabinet installation.

Materials
Doors are made in Oregon using Italian/Spanish textured laminate (composite core) and banded with extremely durable 1mm thick matching PVC banding
Cabinet interiors are Italian/Spanish textured laminate, horizontal grain, (*banding is vertical grain on the left and right sides)
Drawer Boxes are made in Oregon, dovetailed Baltic 5/8" birch plywood (fully assembled, notched, sanded, then clearcoat finished to ensure smooth joints)

Hardware
Knobs and Pulls are not included with any of our cabinets
Hinges are made in North Carolina, Blum Inserta Blumotion (soft closing, self closing)
Drawer slides are made in North Carolina, Blum Tandem plus Blumotion (soft closing, heavy duty)
All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)

Notes
Construction holes will be visible on the sides of the cabinet once assembled.
Finished end panels (ordered separately) should be ordered to finish off the exposed cabinet sides after installation.

Share your knowledge of this product. Be the first to write a review »