Home > Kitchen > Wall > Appliance Cases >

0 door refrigerator enclosure (fully integrated refrigerators)

0 door refrigerator enclosure (fully integrated refrigerators)


 
Alternative Views:


Retail Price $1,454.95
Sale Price + Options: $807.95
Savings: $647.00



Product Code: TREFAPPLIANCECASEM

Size

WIDTH*:


HEIGHT*:


DEPTH*:


OPENING WIDTH*:


OPENING HEIGHT*:


OPENING DEPTH*:

Advanced Options

Front Edge Material*:


Interior Color*:


Toe Kick*:


Qty:
Description
 
This is a tall refrigerator enclosure cabinet that works with refrigerators that require a dedicated opening up off the floor. Specifically designed to house the Bosch 800 series built-in refrigerator freezer.


The bottom of the opening is 4 3/4" off the floor (4" toe kick plus 3/4" thick deck). There is no toe kick plate at the toe kick area (allow ventilation), cover toe kick with an aftermarket vent of your choosing (not included). The top and the deck are cut short at the rear by 2 3/4" to allow for proper air ventilation to travel from under the cabinet, up behind the back, and out the top.


WARNING: if you plan to stack a wall cabinet on top of this cabinet, you will need to reduce the DEPTH of the wall cabinet by 3". This allows the air flow to travel unrestricted up behind the wall cabinet out the top of the combined cabinet stack.
Quick Specifications
Custom Cabinets - Made In Oregon

Standard Cabinets (the interior is not visible once doors/drawer are closed)


Construction
All cabinets are shipped ready to assemble (i.e. flat packed)
Full overlay (flush look) frameless construction (European style, confirmat screw assembly)
Full access (maximum storage capacity with no wasted space)

Materials
Doors are made in Oregon using Italian textured laminate (composite core) and banded with extremely durable 1mm thick banding
Cabinet Cases are made in Oregon, ultra durable thermally fused grey laminate (flat, no grain, plywood core with MDF cross bands) and banded with extremely durable 1mm thick banding
Drawer Boxes are made in Oregon, dovetailed 5/8" Baltic birch plywood (fully assembled, notched, sanded, then clearcoat finished to ensure smooth joints)

Hardware
Knobs and Pulls are not included with any of our cabinets
Hinges are made in North Carolina, Blum "Inserta" Blumotion (soft closing, self closing)
Drawer slides are made in North Carolina, Blum Tandem plus Blumotion (soft closing, heavy duty)
All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)

Notes
Construction holes will be visible on the sides, top, and bottom of the cabinet once assembled.
Finished end panels(ordered separately)should be ordered to finish off the exposed cabinet sides after installation.

Share your knowledge of this product. Be the first to write a review »