Home > Kitchen > Base > Standard >

1 door 45 degree transition cabinet LEFT HINGED (24" deep to 12" deep)

1 door 45 degree transition cabinet LEFT HINGED (24" deep to 12" deep)


 
Alternative Views:


Retail Price $953.95
Sale Price + Options: $529.95
Savings: $424.00



Product Code: B1D45TRANSITIONLEFTM

Size

WIDTH*:


HEIGHT*:


DEPTH*:

Doors and Drawer Fronts
Click to view another Door/Drawer Front Style

Door/Drawer Front Style*:

Click to view another Grain Direction

Grain Direction*:

Advanced Options

Interior Color*:

Click to view another Toe Kick

Toe Kick*:


Disclaimer*:
I have read the "notes" under the "description" tab of this product and agree to all conditions

Qty:
Description
 
NOTES

This is an angled base transition cabinet. You can go from a 24" deep cabinet to a 12" deep cabinet run and have access to thee interior of this transition cabinet. This is a very handy cabinet when space get a bit tight!

DISCLAIMER: BY ORDERING THIS CABINET YOU HAVE AGREED TO ALL TERMS LISTED HERE:
1. There is no toe kick plate for this cabinet due to the angle involved. The customer will need to skin the face of the toe kick area using a toe skin, or some sort of material to cover the gap at installation.
2. Note the way the door overlaps the face of the cabinet. The front edge of the cabinet case (edge banding on the unfinished end) will be exposed on the 24" deep side. This will be exposed to view even when the door is closed. This creates a sort of gap between this cabinet and the one next to it on the 24" deep side. Example:



Quick Specifications
Custom Cabinets - Made In Oregon

Standard Cabinets (the interior is not visible once doors/drawer are closed)


Construction
All cabinets are shipped ready to assemble (i.e. flat packed)
Full overlay (flush look) frameless construction (European style, confirmat screw assembly)
Full access (maximum storage capacity with no wasted space)

Materials
Doors are made in Oregon using Italian textured laminate (composite core) and banded with extremely durable 1mm thick banding
Cabinet Cases are made in Oregon, ultra durable thermally fused grey laminate (flat, no grain, plywood core with MDF cross bands) and banded with extremely durable 1mm thick banding
Drawer Boxes are made in Oregon, dovetailed 5/8" Baltic birch plywood (fully assembled, notched, sanded, then clearcoat finished to ensure smooth joints)

Hardware
Knobs and Pulls are not included with any of our cabinets
Hinges are made in North Carolina, Blum "Inserta" Blumotion (soft closing, self closing)
Drawer slides are made in North Carolina, Blum Tandem plus Blumotion (soft closing, heavy duty)
All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)

Notes
Construction holes will be visible on the sides, top, and bottom of the cabinet once assembled.
Finished end panels(ordered separately)should be ordered to finish off the exposed cabinet sides after installation.

Share your knowledge of this product. Be the first to write a review »