Home >

Two piece WIDE STILE Tall finished end panel (HORIZONTAL grain- OVER 80" HEIGHT)

Two piece WIDE STILE Tall finished end panel (HORIZONTAL grain- OVER 80" HEIGHT)


 
Alternative Views:


Retail Price $539.95
Sale Price + Options: $299.95
Savings: $240.00



Product Code: TFEWIDE2PCHM

Size

WIDTH*:


HEIGHT*:


DEPTH*:

Doors and Drawer Fronts

Door/Drawer Front Style*:

Advanced Options

Disclaimer*:
TALL 2 x piece wide stile end panelsThis product is shipped in six separate pieces. The face and back panels will overlap the left and right sides creating seams on each side. Face and back panels are attached using the "pre-glued" green dowels included in your hardware package. Soak these dowels in water first, then insert, and firmly press face panel to the sides to complete the assembly.

no longer available
Description
 
THERE WILL BE A SEAM HALF WAY UP THIS TALL END PANEL. This product consists of two separate wide stile end panels (similar to the base wide stile end panel product, you get two of them which essentially you will stack on top of each other) with a seam separating the upper and lower halves. Assemble the upper section, then assemble the lower section. Install by stacking the upper section on top of lower section. All holes are pre drilled in the parts themselves so you scan simply insert the included pre glued dowels and assemble with ease. Why two separate sections stacked on top of each other? To achieve a horizontal grain, we are limited to 80" maximum height for single panel (the sheets we cut from come to us at 80" wide). In this product we use two separate pieces to achieve height much taller than the 80" maximum. Wide stile TALL finished end panel for a thick end panel look.  This product is shipped in separate pieces, joined together on site by the customer with pre glued dowels that will be included with your hardware kit. Soak the dowels in a bowl of water for 5 minutes, then insert into the predrilled holes, snuggly push the parts together keeping holes aligned. Allow to dry for about 8 hours before installation.
Quick Specifications
Custom Cabinets - Made In Oregon

Standard Cabinets (the interior is not visible once doors/drawer are closed)


Construction
All cabinets are shipped ready to assemble (i.e. flat packed)
Full overlay (flush look) frameless construction (European style, confirmat screw assembly)
Full access (maximum storage capacity with no wasted space)

Materials
Doors are made in Oregon using Italian textured laminate (composite core) and banded with extremely durable 1mm thick banding
Cabinet Cases are made in Oregon, ultra durable thermally fused grey laminate (flat, no grain, plywood core with MDF cross bands) and banded with extremely durable 1mm thick banding
Drawer Boxes are made in Oregon, dovetailed 5/8" Baltic birch plywood (fully assembled, notched, sanded, then clearcoat finished to ensure smooth joints)

Hardware
Knobs and Pulls are not included with any of our cabinets
Hinges are made in North Carolina, Blum "Inserta" Blumotion (soft closing, self closing)
Drawer slides are made in North Carolina, Blum Tandem plus Blumotion (soft closing, heavy duty)
All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)

Notes
Construction holes will be visible on the sides, top, and bottom of the cabinet once assembled.
Finished end panels(ordered separately)should be ordered to finish off the exposed cabinet sides after installation.

Share your knowledge of this product. Be the first to write a review »