Home > Bath > Wall > Appliance Cases
Sort By:
Page of 1
Standard wall appliance case Standard wall appliance case

Simple wall appliance case typically used as a wall oven or warming drawer enclosure.

Retail Price $464.95
Sale Price + Options: $257.95
Standard wall appliance case (DUAL TOP) Standard wall appliance case (DUAL TOP)

Wall appliance case with a double thick top.

Retail Price $484.95
Sale Price + Options: $268.95
Wall appliance case (DUAL TOP AND DUAL DECK) Wall appliance case (DUAL TOP AND DUAL DECK)

Wall appliance case with a double thick top and a double thick bottom.

Retail Price $509.95
Sale Price + Options: $282.95
Wall appliance case (DUAL TOP, DUAL DECK, DUAL STILES) Wall appliance case (DUAL TOP, DUAL DECK, DUAL STILES)

Wall appliance case with a double thick top and a double thick bottom. This case also has two vertical stile on each side of the opening for an extra wide left and right side.

Retail Price $536.95
Sale Price + Options: $297.95
Wall appliance case (TWO WIDE VERTICAL FILLERS) Wall appliance case (TWO WIDE VERTICAL FILLERS)

Wall appliance case with two wide fillers on each side of the opening.

**This cabinet will have multiple seams on the face of the cabinet where the frames/fillers intersect with the cabinet face. This can be unsightly and should be covered by an overlapping trim kit whenever possible to minimize these seams.Additional fillers or a full panel (not included) may be needed to hide seams.

Retail Price $554.95
Sale Price + Options: $307.95
Wall appliance case (DUAL TOP, DUAL DECK, TWO WIDE VERTICAL FILLERS) Wall appliance case (DUAL TOP, DUAL DECK, TWO WIDE VERTICAL FILLERS)

Wall appliance case with two wide fillers on each side of the opening. This cabinet has a double thick and a double thick bottom.

**This cabinet will have multiple seams on the face of the cabinet where the frames/fillers intersect with the cabinet face. This can be unsightly and should be covered by an overlapping trim kit whenever possible to minimize these seams.Additional fillers or a full panel (not included) may be needed to hide seams.

Retail Price $611.95
Sale Price + Options: $339.95
Standard tall appliance case Standard tall appliance case

Simple tall appliance case typically used as a wall double oven cabinet case.

Retail Price $1,097.95
Sale Price + Options: $609.95
Tall appliance case with a DUAL TOP and DUAL DECK Tall appliance case with a DUAL TOP and DUAL DECK

Tall appliance case typically used when a wider flat surface is needed near the top and bottom of the opening.

Retail Price $1,229.95
Sale Price + Options: $682.95
0 door refrigerator enclosure (fully integrated refrigerators) 0 door refrigerator enclosure (fully integrated refrigerators)

This is a tall refrigerator enclosure cabinet that works with refrigerators that require a dedicated opening up off the floor. Specifically designed to house the Bosch 800 series built-in refrigerator freezer.


The bottom of the opening is 4 3/4" off the floor (4" toe kick plus 3/4" thick deck). There is no toe kick plate at the toe kick area (allow ventilation), cover toe kick with an aftermarket vent of your choosing (not included). The top and the deck are cut short at the rear by 2 3/4" to allow for proper air ventilation to travel from under the cabinet, up behind the back, and out the top.


WARNING: if you plan to stack a wall cabinet on top of this cabinet, you will need to reduce the DEPTH of the wall cabinet by 3". This allows the air flow to travel unrestricted up behind the wall cabinet out the top of the combined cabinet stack.

Retail Price $1,454.95
Sale Price + Options: $807.95